Listing for Category: Integrated Abutment Crowns™

thumbnail

One-Stage Surgical Placement of Two Maxillary and One Mandibular Congenitally Missing Lateral Incisors with SHORT® Implants

Posted on in Integrated Abutment Crowns™, One Stage, Restorative, SHORT® Implants, Surgical

This treatment demonstrates the Bicon one-stage surgical technique with transmucosal Temporary Abutments for three congenitally missing lateral incisors in a 21-year-old man and their subsequent prosthetic restoration with three Integrated Abutment Crowns™(IACs).

thumbnail

Immediate Load of Three Maxillary Incisor 4.5 x 8.0mm Implants

Posted on in Immediate Placement, Integrated Abutment Crowns™, Restorative, Surgical

This treatment demonstrates the extraction of teeth #8, 9, and 10, and the subsequent placement and immediate loading of three 4.5 x 8.0mm implants with 2.5mm wells, the preparation of the osteotomy with latch reamers rotating at 50RPM, as well as the fabrication of a temporary stabilizing prosthesis with polyacrylate material and a vacupress former.

thumbnail

Anterior Placement of Two 3.0 x 6.0mm SHORT® Implants with Mandibular Central Incisor Integrated Abutment Crowns™

Posted on in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Uncovering

This treatment demonstrates the placement of two 3.0 x 6.0mm SHORT® Implants with 2.0mm wells and the insertion of two mandibular central incisor Integrated Abutment Crowns™ (IACs).

thumbnail

Placement of Two 4.0 x 6.0mm SHORT® Implants in the areas of Congenitally Missing Maxillary Lateral Incisors with Grafting Procedures

Posted on in Integrated Abutment Crowns™, Restorative, SHORT® Implants

This treatment demonstrates the placement of two 4.0 x 6.0mm SHORT® Implants for the replacement of congenitally missing maxillary lateral incisors using harvested autogenous bone, SynthoGraft™ (a pure phase beta-tricalcium phosphate), collagen membranes, and leukocyte platelet-rich fibrin (LPRF) membranes.

thumbnail

The Insertion of Two Contiguous Implants into a Mandibular Bone Void Using Sinus Lift Abutments with SynthoGraft®, and Their Subsequent Restoration with Two Integrated Abutment Crowns™

Posted on in Integrated Abutment Crowns™, SHORT® Implants

This treatment demonstrates the insertion of a 4.0 x 6.0mm implant and a 4.5 x 6.0mm implant into two contiguous mandibular osteotomies, which communicated with each other because of a bone void. After preparation of the implant osteotomies through the crest of cortical bone, the soft tissue content of the bone void was thoroughly removed from the bony walls of the defect with a spoon excavator prior to filling the defect with a putty-like consistency of the patient’s blood and SynthoGraft®, a pure-phase beta-tricalcium phosphate. A sinus lift abutment was used to prevent the implants from being displaced into the defect. Subsequently, the implants were restored with Universal Abutments and Integrated Abutment Crowns (IACs).

thumbnail

Guided Bone Regeneration Technique and Implant Placement in an Atrophic Mandibular First Molar Site

Posted on in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Uncovering

This treatment offers an alternative to ridge splitting procedures, demonstrating the molar implant placement and simultaneous guided bone regeneration of a 56-year-old woman’s atrophic left mandible. Because of the very thin and dense crestal bone, a high-speed drill was used to initiate the osteotomy prior to the successive use of latch and hand reamers, and the placement of a 4.5 x 6.0mm implant, which was covered with SynthoGraft™ within a collagen membrane pocket. The 5-year post-insertion clinical and radiographic images reveal a successful treatment with significant bone gain.

thumbnail

Extraction of a Maxillary Left First Premolar and its Replacement with a SHORT® 4.5 x 6.0mm Implant, and Grafting with LPRF, Collagen Membranes, and SynthoGraft™, a pure phase beta tricalcium phosphate

Posted on in Extraction, Integrated Abutment Crowns™

This case demonstrates the extraction of a maxillary left first premolar and its replacement with a SHORT® 4.5 x 6.0mm implant using SynthoGraft™, Leukocyte and Platelet Rich Fibrin (LPRF), and collagen membranes. The osteotomy was carefully prepared using latch and hand reamers in 0.5mm increments despite a buccal bone perforation.

thumbnail

Restoration of a Maxillary Left First Molar with an Abutment-Level Transfer Impression

Posted on in Integrated Abutment Crowns™, Restorative, Uncovering

This case demonstrates the process of fabricating an abutment-level transfer impression and a transitional crown with a 5L Universal Abutment after uncovering the implant in the area of the maxillary left first molar.

thumbnail

Placement and Restoration of a 3.0 x 6.0mm SHORT® Implant in a Seemingly Impossible Clinical Situation

Posted on in Immediate Placement, Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical

This case demonstrates three years of remarkable healing and clinical capabilities of a Bicon implant which was restored with an Integrated Abutment Crown™ (IAC) in a seventy-two-year-old male patient. Due to a variety of extenuating circumstances, a 3.0 x 6.0mm SHORT® Implant was immediately placed with a significant amount of SynthoGraft™, a pure phase beta tricalcium phosphate material, and a collagen membrane in a seemingly impossible clinical situation after the removal of a fractured and infected mandibular lateral incisor.

thumbnail

Restoration of Two Maxillary Premolar SHORT® Implants with Integrated Abutment Crowns™

Posted on in Integrated Abutment Crowns™, Restorative

This case demonstrates the ease and simplicity of restorative visits with Bicon Dental Implants. In addition, this case also demonstrates the three primary ways to rotate a sulcus former and two ways to record an implant-level transfer impression.