This case demonstrates the two-stage placement of five 4.0 x 5.0mm Bicon SHORT® Implants, uncovering, implant-level transfer impression, and implant restorations with Bicon Integrated Abutment Crowns™.

This case demonstrates a bar overdenture restoration with the use of four 4.0 x 5.0mm with 2.5mm well Bicon Integra-CP™ implants.

This case demonstrates the reconstruction of the maxillary arch completed in three surgical phases. In total, twelve Bicon implants were placed and restored with Integrated Abutment Crowns™ in six clinical visits.

This case demonstrates the extraction and immediate placement of a 5.0 x 8.0mm implant for a maxillary central incisor and its restoration with an Bicon Integrated Abutment Crown™.

This case demonstrates the placement of two 4.5 x 6.0mm implants and two 5.0 x 5.0mm implants. The implants were placed in the mandible and were subsequently restored with Bicon Integrated Abutment Crowns™.

This case demonstrates the two-stage placement, uncovering, implant-level transfer impression, and restoration of a congenitally missing right lateral incisor with a Bicon Integrated Abutment Crown™.

The following radiographic images demonstrate the fact that Bicon SHORT® Implants require minimal bone, which frequently eliminates the need for bone grafting procedures and anxiety when placing implants near vital structures.

This case demonstrates the sequencing of extraction site preparation with Bicon Resorbable Collagen Membrane, implant placements, temporizations and restoration of three maxillary anterior implants with three Integrated Abutment Crowns™.

This case demonstrates the sequencing of a maxillary ridge split placement of two maxillary anterior implants with Bicon Resorbable Collagen Plug, implant-level transfer impression, temporizations and restoration of two 4.5 x 8.0mm implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the maxillary anterior placement of four MAX 2.5™ 4.0 x 8.0mm implants with Bicon’s NEW 2.5mm diameter well and their subsequent restoration with Integrated Abutment Crowns™.

This case demonstrates the use of a 6.0mm wide by 5.7mm long implant to restore a missing mandibular first molar from the one stage surgical placement of the short implant to the implant level impression for and insertion of an Integrated Abutment Crown™ as well as the chair-side closure of an open inter-proximal contact.

This case demonstrates the two-stage placement of two 6.0mm x 5.7mm implants for two maxillary molars, uncovering, implant-level transfer impression, and implant restorations with Bicon Integrated Abutment Crowns™.

This case demonstrates the two stage placement of two implants, implant level transfer impression, and their restoration with Bicon Integrated Abutment Crowns™ for two lateral incisors.

This case demonstrates the two-stage placement, uncovering, implant-level transfer impression, and restoration of a congenitally missing right lateral incisor with a Bicon Integrated Abutment Crown™ and a veneer on the maxillary right canine to achieve an aesthetic result.

This case demonstrates the use of SynthoGraft™ pure phase Beta-Tricalcium Phosphate for an internal sinus lift, two-stage surgical placement of a 5.0mm x 6.0mm implant and a 6.5mm x 2.5mm Sinus Lift Temporary Abutment, an implant-level impression, and an insertion of an Integrated Abutment Crown™.

This case demonstrates the sequencing of extraction, site preparation with a mandibular ridge split, two-stage implant placements, and implant-level transfer impression of two left mandibular teeth and their restoration with Integrated Abutment Crowns™.

This case demonstrates the placement of two implants and bone grafting with Synthograft™, uncovering of the implants, and insertion of two locator abutments with their metal housing caps integrated into the denture.

This case demonstrates the extraction of two mandibular teeth, two-stage implant placements, uncovering, full arch implant-level transfer impression, and their restorations with an Integrated Abutment Crown and an Integrated Abutment Crown with a cantilever.

This case demonstrates the two-stage implant placement, implant-level transfer impression, and restoration of three 4.5 x 6.0mm Short implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the extraction and two stage immediate placement of a 4.5mm x 6.0mm HA coated maxillary right lateral incisor implant as well as its restoration with a Bicon Integrated Abutment Crown™.

This case demonstrates the two stage placement, uncovering, implant level transfer impression, and restoration of a congenitally missing left lateral incisor with Bicon Integrated Abutment Crown™.

This case demonstrates the extraction, immediate placement, implant-level transfer impression, temporization, and restoration of maxillary central incisor implant with an Integrated Abutment Crown™.

This case demonstrates a mandibular ridge split, two stage placement and uncovering of four mandibular posterior implants as well as the implant level transfer impression for the insertion of Bicon Integrated Abutment Crowns™.

This case demonstrates implant level transfer impression and the restoration of two 3.5mm x 11mm mandibular anterior implants with Integrated Abutment Crowns™.

This case demonstrates the restoration of three mandibular molars using two 5.0mm x 6.0mm short implants and one 4.5mm x 6.0mm short implant with an Integrated Abutment Crown™

This case demonstrates the two stage placement of two implants, temporization, uncovering, implant level transfer impression, and their restoration with Bicon Integrated Abutment Crowns™ for two congenitally missing lateral incisors.

This case demonstrates a mandibular ridge split, a two stage implant placement with implant level transfer impression of two left mandibular molar and premolar implants, and their restoration with Integrated Abutment Crowns™.

This case demonstrates the two stage placement, implant level impression and insertion of eight short Bicon implants with two seven unit fixed prostheses.

This case demonstrates the two stage implant placement, implant level transfer impression and restoration of mandibular incisor implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the extraction, two stage implant placement, implant level transfer impression, and restoration of mandibular 6.0mm x 5.7mm Short implant with Bicon Integrated Abutment Crown™.

This case demonstrates the sequencing of extraction site preparation with Bicon Resorbable Collagen Plug, implant placements, temporizations and restoration of two 5x6mm short implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the replacement of three fifteen year old porcelain fused to metal crowns with three Integrated Abutment Crowns™ in one day.

This case demonstrates the extraction, immediate placement, implant level transfer impression, temporization and restoration of maxillary central incisor implant with Integrated Abutment Crown™.

This case demonstrates the extraction and immediate placement of four maxillary anterior 4.5mm x 6.0mm HA coated short implants; as well as implant level transfer impression and their restoration with four Integrated Abutment Crowns™.

This case demonstrates the insertion of angled fixed detachable abutments on three nonparallel implants and the making of an abutment level transfer impression as well as the design and fabrication of a Dolder bar overdenture with CAD/CAM technology.

This case demonstrates the extraction of a mandibular lateral incisor with root resorption and its replacement with an immediately placed implant using the two stage surgical technique as well as the subsequent restoration of the implant with an Integrated Abutment Crown™, with all treatment being accomplished in three clinical visits.

This case demonstrates the extraction of a failed endodontically treated maxillary central incisor and its replacement with an immediately placed and functioning implant as well as its restoration with an Integrated Abutment Crown™ showing a prosthetic technique for masking the metallic graying of thin gingival tissues from the underlying abutment.

This case demonstrates the use of Synthograft™, Pure Phase Beta-Tricalcium Phosphate, for bone grafting, two stage placement and restoration of nine implants, implant level transfer impression, occlusal registration, and insertion of nine Integrated Abutment Crowns™ including three two-unit Integrated Abutment Crowns™ for the intraoral fabrication of a four unit prosthesis and a three unit prosthesis.

This case demonstrates implant level transfer impression and the restoration of a 4.5mm x 6.0mm maxillary right central incisor implant with Integrated Abutment Crown™.

This case demonstrates the two stage placement, uncovering, implant level transfer impression, and restoration of a congenitally missing left lateral incisor with Bicon Integrated Abutment Crown™.

This case demonstrates the two stage implant placement, implant level transfer impression, temporization, laboratory technique and restoration of maxillary lateral incisor implant with an Integrated Abutment Crown™.

This case demonstrates the extraction, two stage implant placement, implant level transfer impression, and restoration of maxillary 5.0mm x 6.0mm Short implant with Bicon Integrated Abutment Crown™

This case demonstrates a one day prosthetic solution for the restoration of two maxillary implants in a surgically compromised site.

This case demonstrates an immediate two stage placement of mandibular central incisor implant, implant level transfer impression and its restoration with an Integrated Abutment Crown™ as well as an aesthetic resolution of open interproximal contacts.

This case demonstrates implant level transfer impression and the replacement of existing ten year old All-Ceramic crown on a maxillary right central incisor implant and porcelain fused to metal crown on a maxillary left central incisor implant with two Integrated Abutment Crowns™ in one clinical visit to enhance the aesthetic result.

This case demonstrates the two stage implant placement, implant level transfer impression, temporization and restoration of two maxillary central incisor implants with Bicon Integrated Abutment Crowns™.

This case demonstrates implant placement, temporization and restoration of two 4.5mm x 6.0mm short implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the implant placements, implant level transfer impression and restoration of two 4.5mm x 6.0mm short implants for two congenitally missing lateral incisors with Bicon Integrated Abutment Crowns™.

This case demonstrates the extraction of three maxillary anterior teeth, insertion of five maxillary anterior immediately placed, stabilized, and functioning implants, as well as implant level transfer impression, and their restoration with five Integrated Abutment Crowns™.

This case demonstrates the extraction, immediate placement, stabilization of two 5.0mm x 6.0mm Nanotite short implants as well as their restoration with Integrated Abutment Crowns™.

This case demonstrates the restoration for a congenitally missing maxillary right lateral incisor with an immediate loading and temporization of 4.5mm x 8.0mm HA coated maxillary right canine implant, implant level transfer impression, and insertion of an Integrated Abutment Crown™.

This case demonstrates the replacement of an existing porcelain fused to metal crown on a maxillary left central incisor implant with an Integrated Abutment Crown™, which was inserted three years previously and was prone to loosening.

This case demonstrates a maxillary ridge split, two stage placement, uncovering, implant level transfer impression, and restoration with Bicon Integrated Abutment Crowns™ of two implants replacing congenitally missing lateral incisors.

This case demonstrates the use of SynthoGraft™, pure phase Beta-Tricalcium Phosphate, for bilateral sinus lifts, two stage placement and restoration of fourteen implants, implant level transfer impressions, occlusal registration, and insertion of fourteen Integrated Abutment Crowns™ including one two-unit Integrated Abutment Crown™ for the intraoral fabrication of a three unit prosthesis.

This case demonstrates the surgical placement and temporization of two maxillary lateral incisor implants, implant level transfer impression and their routine restoration with Bicon Integrated Abutment Crowns™.

This case demonstrates the sequencing of extraction site preparation with Bicon Resorbable Collagen Plug, implant placements, temporizations and restoration of two 5 x 6mm short implants with Bicon Integrated Abutment Crowns™.

This case demonstrates the extraction of fourteen teeth, insertion of sixteen immediately placed, stabilized, and functioning implants, implant level transfer impression, and their restoration with Sixteen Integrated Abutment Crowns™.

This case demonstrates a restoration of maxillary right lateral incisor implant with an Integrated Abutment Crown™ with subsequent closure of open interproximal contact and treatment of bony dehiscence with SynthoGraft™, pure phase Beta-Tricalcium Phosphate (Ca3(PO4)2).

This case demonstrates the extraction, two stage surgical placement of two 3.5mm x 11.0mm mandibular lateral incisor implants, implant level transfer impression, occlusal registration and the insertion of two 2 unit Integrated Abutment Crowns™.

This case demonstrates a maxillary ridge split, two stage placements of four anterior implants, implant level transfer impression and their routine restoration with Integrated Abutment Crowns™ despite the extreme trajectories of the implants.

This case demonstrates the extraction and immediate placement of a 5.0mm x 8.0mm HA coated maxillary right lateral incisor implant as well as its restoration with a Bicon Integrated Abutment Crown™.

This case demonstrates the extraction of two maxillary lateral incisors, two stage placement of a 4.5mm x 11.0mm implants, temporization, implant level transfer impression and the insertion of Integrated Abutment Crowns™.

This case demonstrates the extraction, immediate placement and stabilization of a 4.5mm x 8.0mm HA coated maxillary right lateral incisor implant as well as its restoration with a Bicon Integrated Abutment Crown™.

This case demonstrates poorly positioned implant being explanted, grafting, two stage placement of two 4.5mm x 8.0mm HA coated implants, temporization, uncovering, implant level transfer impression, and their restoration with Bicon Integrated Abutment Crowns™ for two congenitally missing lateral incisors.

This case demonstrates the two stage placement of two implants, temporization, uncovering, implant level transfer impression, and their restoration with Bicon Integrated Abutment Crowns™ for two congenitally missing lateral incisors.

This case demonstrates the two stage surgical placement of a 3.5mm x 11.0mm HA coated implant, implant level transfer impression and the insertion of an Integrated Abutment Crown™.

This case demonstrates a sinus lift with SynthoGraft™ and the full mouth restoration of twenty-four implants with the placement of fourteen two-stage and ten immediately placed and stabilized implants while using three transitional implants, implant level transfer impressions, occlusal registration, and insertion of twenty-four Integrated Abutment Crowns™.

This case demonstrates the extraction of failed endodontically treated teeth and the immediate placement and stabilization of two 4.0mm x 11.0mm HA coated maxillary lateral incisor implants as well as their restoration with Bicon Integrated Abutment Crowns™.

This case demonstrates the extraction of six anterior teeth, insertion of four maxillary and two mandibular immediately placed, stabilized, and functioning implants, implant level transfer impression, metal try-in, and their restoration with Integrated Abutment Crowns™, a PFM bridge, as well as two Procera crowns cemented on natural teeth.

This case demonstrates the use of SynthoGraft™, pure phase Beta-Tricalcium Phosphate, for bilateral sinus lifts, subsequent maxillary ridge split, two stage placement of four maxillary implants, and their restoration with Brevis™ abutments and a metal framed implant retained overdenture.

This case demonstrates the full mouth restoration of nineteen implants with the placement of twelve two stage and seven immediately placed and stabilized implants using transitional implants, implant level transfer impressions, occlusal registration, and insertion of nineteen Integrated Abutment Crowns™ including three two-unit Integrated Abutment Crowns™ for the intraoral fabrication of two fixed bridges.

This case demonstrates the two stage surgical placement of two 4.5 x 6.0mm maxillary lateral incisor SHORT™ Implants as well as their restoration with Integrated Abutment Crowns™.

This case demonstrates a mandibular alveolar ridge split, two stage placement and uncovering of two implants including an immediate loading and stabilization of a 5.0mm x 6.0mm HA coated short implant, implant level transfer impression, and restoration with three Bicon Integrated Abutment Crowns™ as well as the remedial aesthetic treatment of a metallic gingival margin.

This case demonstrates the extraction of a maxillary left central incisor, two stage placement of a 4.5mm x 8.0mm implant, implant level transfer impression and the insertion of an Integrated Abutment Crown™

This case demonstrates the full mouth restoration of twenty-one implants with the placement of twelve two stage and four immediately placed and stabilized implants including 5.0mm x 6.0mm short implants, implant level transfer impressions, occlusal registration, and insertion of twelve Integrated Abutment Crowns™ including three two-unit Integrated Abutment Crowns™, as well as the cementation of five PFM crowns on five non-Bicon implants.

This case demonstrates the two stage surgical placement of a maxillary right central incisor implant, implant level transfer impression and the insertion of an Integrated Abutment Crown™.

This case demonstrates a maxillary ridge split, two stage placement and uncovering of a left lateral incisor implant as well as the implant level transfer impression and insertion of a Bicon Integrated Abutment Crown™.

This case demonstrates the extraction of a failed endodontically treated maxillary left central incisor, placement of an immediately stabilized and functioning implant, implant level transfer impression, insertion of a Bicon Integrated Abutment Crown™ as well as an aesthetic treatment of its metallic gingival margin.

This case demonstrates the chairside overdenture technique for the replacement of a too tall o-ring abutment with a 4.0mm 0° Brevis™ abutment.

This case demonstrates the use of SynthoGraft™, pure phase Beta-Tricalcium Phosphate, for bilateral sinus lifts with floor transport technique using sinus lift temporary abutments, two stage placement, implant level impression and insertion of twelve maxillary full arch Integrated Abutment Crowns™.

This case demonstrates the extraction of a failed endodontically treated maxillary left central incisor, site preparation by grafting with Bicon Resorbable Collagen Membrane, placement of an immediately stabilized and functioning implant, implant level transfer impression, insertion of a Bicon Integrated Abutment Crown™ and adding to the incisal edge.

This case demonstrates the extraction of failed endodontically treated teeth and the immediate placement and stabilization of two 5.0mm x 8.0mm HA coated maxillary central incisor implants as well as their restoration with Bicon Integrated Abutment Crowns™.

This case demonstrates the two stage surgical placement of a 5.0mm wide by 6.0mm short implant, implant level transfer impression and the insertion of an Integrated Abutment Crown™.

This case demonstrates the use of SynthoGraft™ pure phase Beta-Tricalcium Phosphate for bilateral sinus lifts, two stage surgical full arch placement of ten 5.0mm x 6.0mm short implants and two 4.5mm x 8.0mm implants, implant level impression and insertion of twelve Integrated Abutment Crowns™.

This case demonstrates the treatment sequencing of extraction site preparation with Bicon Resorbable Collagen Membrane, removal of amalgam stain and placement of Alloderm connective tissue graft, implant placements, temporizations and restoration of two maxillary anterior implants with Integrated Abutment Crowns™ as well as the cementing of polyceramic veneer to the left lateral incisor.

This case demonstrates the extraction of a mandibular left lateral incisor with a periapical abcess and its replacement with an immediately stabilized implant and its restoration with an Integrated Abutment Crown™.

This case demonstrates the immediate placement and loading, implant level transfer impression, and the restoration of a maxillary left first bicuspid with an Integrated Abutment Crown™ as well as the ease with which a metallic gingival margin resulting from a tear of the buccal mucosa on a one-year old Integrated Abutment Crown™ can be aesthetically improved.

This case demonstrates the immediate loading and temporization of four maxillary incisor implants and their restoration with Integrated Abutment Crowns™.

This case demonstrates the two stage full mouth implant placement technique for twenty-four implants including 6.0 x 5.7mm and 5.0 x 6.0mm short implants as well as their restoration with twenty-one Integrated Abutment Crowns™ (IACs) and two intra-orally bonded two-unit cantilever Integrated Abutment Crowns™ (IACs).

This case demonstrates the two stage full mouth implant placement technique for twenty-four implants including 6.0 x 5.7mm and 5.0 x 6.0mm short implants as well as their restoration with twenty-one Integrated Abutment Crowns™ (IACs) and two intra-orally bonded two-unit cantilever Integrated Abutment Crowns™ (IACs).

This case demonstrates the implant level transfer impression for two maxillary left incisor implants that were immediately placed and functioning as well as the shade recording and insertion of their Integrated Abutment Crowns™.

This case demonstrates the two stage, immediate placement and loading of twenty one implants as well as their restoration with Integrated Abutment Crowns™ in four clinical visits during a period of twenty-two weeks.

This case demonstrates the two stage, immediate placement and loading of twenty one implants as well as their restoration with Integrated Abutment Crowns™ in four clinical visits during a period of twenty-two weeks.

This case demonstrates the extraction of a maxillary left central incisor with internal resorption, immediate placement, transitional stabilization, implant level transfer impression, and insertion of immediately stabilized or loaded maxillary left central incisor implant as well as the insertion of an Integrated Abutment Crown™ with a seating jig.

This case demonstrates the extraction of a maxillary left central incisor with internal resorption and the insertion of an immediately stabilized short implant along with its restoration with an Integrated Abutment Crown™.

This case demonstrates the restoration of two mandibular molars using two 5.0mm x 6.0mm short implants and extra-orally cemented porcelain fused to metal restorations.

This case demonstrates how a supra-gingivally placed maxillary first premolar implant with only bone covering a portion of its apical length can be restored acceptably with a skirted Integrated Abutment Crown™ despite its less than ideal positioning.

This case demonstrates the placement of a one-piece transitional o-ring implant and its restoration as well as that of three two-piece implants with a metal framed implant retained overdenture without palatal coverage.

This case demonstrates the two stage replacement and restoration of the removed non-integrated right canine implant.

This case demonstrates the extraction of four mandibular incisors and the immediate placement of two immediately functioning implants and their restoration with a four-unit polyceramic material to metal fixed prosthesis.