Listing for Topics: TRINIA®


Insertion of a Two-Unit TRINIA® Prosthesis to Replace an Ill-Fitting Prosthesis

Posted on in Porcelain Fused to Metal

This treatment demonstrates the insertion of a two-unit TRINIA® prosthesis for maxillary central incisor implants in a 71-year-old male, who presented with an ill-fitting, splinted Porcelain-Fused-to-Metal (PFM) prosthesis.


Immediate Loading of Three Maxillary Implants with a Winged TRINIA® Transitional Prosthesis

Posted on in Immediate Placement, Surgical

This treatment demonstrates the technique of immediately loading two 4.0 x 6.0mm implants and one 5.0 x 5.0mm implant by using a winged TRINIA® transitional prosthesis and one existing 4.5 x 8.0mm implant.


Insertion of a TRINIA® Telescopic Prosthesis

Posted on in Overdentures, Restorative

This treatment demonstrates the insertion of a TRINIA® telescopic restoration on five non-parallel implants for a 70-year-old woman, who previously had a four-implant-retained o-ring overdenture.


Insertion and Relining of a Maxillary Telescopic TRINIA™ Prosthesis

Posted on in Restorative, Telescopic Restorations

This case demonstrates the insertion of a maxillary full arch telescopic restoration with two conventional telescopic copings with yellow retentive inserts and two milled titanium copings on four implants, one of which is badly positioned.


Fabrication and Insertion of a Four-Implant Mandibular Full Arch TRINIA™ Telescopic Prosthesis with Two Lithium Disilicate Crowns to Resist Abrasion of Composite Denture Teeth Against Opposing Maxillary Porcelain Restorations

Posted on in Surgical, Telescopic Restorations

This case demonstrates the fabrication of a four-implant mandibular full arch TRINIA™ telescopic prosthesis, beginning with the making of an implant-level transfer impression and bite registration, followed by the laboratory fabrication of a soft tissue model with four Universal abutments prosthetic posts with two to three degrees of parallelism; a light-cured resin verification jig with milled retentive copings to confirm both a path of insertion and retentiveness of the intended TRINIA™ prosthesis; a light-cured resin seating jig to facilitate the orientation and initial seating of the four Universal abutments intra-orally; and two lithium disilicate molar crowns to preserve the patient’s vertical dimension of the occlusion, by resisting the abrasion of the composite denture teeth against the patient’s maxillary porcelain restorations. Finally, three red retentive copings and one metallic non-retentive coping, which were seated on the Universal abutments, were intra-orally cemented into the bores of the mandibular full arch TRINIA™ prosthesis to provide the patient with a functionally stable and aesthetic restoration.


Placement and Immediate Load of Two Maxillary Central Incisor Implants

Posted on in Extraction, Immediate Placement, Surgical

This case demonstrates the immediate placement and loading of two maxillary central incisor implants using a TRINIA™ and Ceramage transitional prosthesis and two Bicon Universal Abutments to stabilize two immediately placed 4.5 x 8.0mm implants.


Four Immediately Placed and Loaded Maxillary Incisors

Posted on in Extraction, Immediate Placement

This case demonstrates the use of a TRINIA™ transitional prosthesis and four Bicon Universal Abutments to stabilize four immediately placed 4.0 x 6.0mm SHORT® Implants after the extraction of four maxillary incisors.


Restoration of Maxillary and Mandibular Full-Arch Telescopic TRINIA™ Prostheses

Posted on in Restorative, SHORT® Implants, Telescopic Restorations

This case demonstrates the clinical and laboratory procedures for the fabrication of maxillary and mandibular full-arch telescopic TRINIA™ restorations, each using four Bicon SHORT® Implants and cast chrome cobalt copings with Si-tec TK-FRIC retentive attachments in only three clinical visits.


Insertion of a Fixed Telescopic TRINIA™ CAD/CAM Prosthesis

Posted on in Fixed, Restorative, Telescopic Restorations

This case demonstrates the cementation of four telescopic copings into a full-arch maxillary TRINIA™ CAD/CAM prosthesis and its insertion onto four Bicon abutments. The telescopic copings, which are bonded to the prosthesis via Ceraresin® Bond (CRB) by Shofu, are used to realign the abutments to better fit the bores of the prosthesis for both comfort and effective use.


External and Internal Sinus Lifts, Maxillary Metal-Free TRINIA™ Prosthesis

Posted on in Fixed, Restorative, Sinus Lifts, Surgical, Two Stage, Uncovering

This case demonstrates an external and internal sinus lift utilizing Piezosurgery® with SynthoGraft™ pure phase Beta-Tricalcium Phosphate, the two-stage maxillary placement of six Bicon implants, uncovering, implant-level transfer impression, and the clinical insertion techniques for a maxillary metal-free implant supported fixed TRINIA™ prosthesis on six Bicon implants.

Page 2 of 3123