Instrumentation: Tray Contents

The Bicon Surgical Kit

16. Top Tray

Threaded Straight Handle
The straight handle was designed to be used with all threaded instrumentation: hand reamers, sulcus reamers, inserters/retrievers, tissue punches, osteotomes, chisels, bone expanders, seating tips and impression reamers.

Threaded Offset Handle
The offset handle was designed for use with implant and abutment seating tips when direct access is not possible.

Surgical Mallet
The surgical mallet was designed to be used with the threaded straight or offset handles for the seating of implants and abutments. It may also be used during ridge splitting and internal sinus lift procedures.

Dappen Dish
The dappen dish was designed to collect autogenous bone.

17. Middle Tray

Abutment Shoulder Depth Gauge
The abutment shoulder depth gauge was designed to facilitate the measuring of the soft tissue height above an implant for the selection of an abutment with an appropriate shoulder height.

Removal Wrench
The removal wrench was designed to loosen hand reamers, osteotomes, chisels and bone expanders from a threaded straight handle or a threaded knob.

Bone Depth Gauge/Bone Plugger
The bone depth gauge was designed to facilitate the measuring of the osteotomy’s depth. The bone plugger was designed to compress autogenous bone graft material over the shoulder of the implant.

18. Bottom Tray

The bottom tray was designed for the storage of accessory items as well as for the 18:1 and 400:1 handpieces. Handpieces are sold separately from the surgical kit.

Page 1 | Page 2 | Page 3 | Page 4