This treatment demonstrates the extraction of a mandibular primary tooth and the immediate placement of a 5.0 x 6.0mm Bicon SHORT® Implant using the one-stage technique with a tranmucosal temporary abutment. Implant-level and abutment-level impression techniques are also shown, as well as the insertion of the Integrated Abutment Crown™ (IAC).
SURGICAL: Immediate Placement One Stage
RESTORATIVE: Integrated Abutment Crowns™
TOPICS: Impression
Click on an image to view it larger in a slideshow. Click arrow icons or use keyboard arrow to switch photos. To exit the slideshow, click the X in the upper-right or press ESC.
Click "Switch View" below to change to a layout optimized for printing the case.
Pre-operative radiograph.
Pre-operative clinical view.
Non-restorable primary tooth being luxated.
Non-restorable primary tooth being extracted.
2.0mm Pilot Drill being used to initiate a pilot osteotomy immediately after the tooth extraction.
Gold Paralleling Pin seated in the 2.0mm pilot ostetomy.
Light green 2.5mm Latch Reamer being used to widen the osteotomy.
Light blue 3.0mm Latch Reamer being used to widen the osteotomy.
Blue 3.5mm Latch Reamer being used to widen the osteotomy.
Violet 4.0mm Latch Reamer being used to widen the osteotomy.
Gray 4.5mm Latch Reamer being used to widen the osteotomy.
Gold 5.0mm Latch Reamer being used to widen the osteotomy to the diameter of the intended implant.
5.0 x 6.0mm Bicon SHORT® Implant being transported to its prepared osteotomy with a titanium Temporary Abutment.
Temporary Abutment being gently tapped with a Standard Seating Tip.
Temporary Abutment seated in its implant.
Site being sutured around the Temporary Abutment.
Sutured site.
Post-operative radiograph of a 5.0 x 6.0mm Bicon SHORT® Implant with its Temporary Abutment.
Four-month post-operative clinical view of the Temporary Abutment prior to the implant's uncovering.
Green 3.0mm titanium Impression Post seated in its implant.
Green acrylic Impression Sleeve being seated onto its titanium Impression Post.
Green acrylic Impression Sleeve seated on its Impression Post.
Impression material being injected around the Impression Post and Impression Sleeve for the making of an implant-level transfer impression.
6 Series Standard Profile Universal Abutment seated in its implant for the making of an abutment-level transfer impression and a transitional crown.
Green 6 Series Standard Profile Universal Abutment Impression Sleeve seated on its Universal Abutment for the making of an abutment-level transfer impression.
Impression material being injected around the Universal Abutment and its Impression Sleeve for the making of an abutment-level transfer impression.
Temporization Sleeve being seated onto its Universal Abutment for the making of a transitional crown.
Temporization Sleeve being modified extraorally.
Temporization Sleeve being modified intraorally.
Composite material being injected around the Temporization Sleeve for the fabrication of a transitional crown.
Vacupress being used with composite material for the fabrication of a transitional crown.
Clinical view of the transitional crown.
Integrated Abutment Crown™ (IAC) seated in a soft tissue stone model.
View of the IAC prior to being inserted into its implant.
Clinical view of the implant well and sulcus.
IAC being inserted into its implant.
Floss marked with blue ink being used to confirm appropriateness of the interproximal contacts.
Facial view of the definitively seated IAC.
Clinical view of the definitively seated IAC.
Post-insertion radiograph of a 5.0 x 6.0mm Bicon SHORT® Implant with its IAC.
Two-year post-insertion radiograph of a 5.0 x 6.0mm Bicon SHORT® Implant with its IAC.
 |
Copyright © Bicon, LLC | Terms of Use | 501 Arborway Boston, MA 02130 USA support@bicon.com |
Tel: (800) 882-4266 (617) 524-4443 |
Fax: (800) 282-4266 (617) 524-0096 |