This case demonstrates the insertion of three Universal Abutments using a resin seating jig and the adaptation of a TRINIA® prosthesis, prior to the cementing of three Retentive Copings into the bores of the TRINIA® prosthesis for a sixty-eight-year-old female patient.
Click on an image to view it larger in a slideshow. Click arrow icons or use keyboard arrow to switch photos. To exit the slideshow, click the X in the upper-right or press ESC.
Click "Switch View" below to change to a layout optimized for printing the case.
TRINIA® prosthesis placed on three Universal Abutments with Retentive Copings on a stone model.
3.
TRINIA® prosthesis.
4.
TRINIA® prosthesis revealing three bores.
5.
Stone model with three Universal Abutments with three purple Retentive Copings, seated in implant analogs within stone model. Note the numerals, which indicate the insertion sequence of the Universal Abutments while using the resin seating jig.
6.
Clinical view of three Titanium Temporary Abutments.
7.
Forceps being used to remove a Titanium Temporary Abutment from the well of an implant.
8.
Forceps being used to remove a Titanium Temporary Abutment from the well of an implant.
9.
Clinical view after the removal of the three Titanium Temporary Abutments.
10.
Resin abutment seating jig.
11.
Vaseline being applied to a bore of the resin seating jig to facilitate its removal after the seating of the Universal Abutments.
12.
Two Universal Abutments being transported to the left two implants with a seating jig.
13.
Resin seating jig on two Universal Abutments after their placement in the well of their implants.
14.
Universal Abutment being seated with a Seating Tip on a Threaded Straight Handle.
15.
Universal Abutment being seated with a Seating Tip on a Threaded Straight Handle.
16.
Universal Abutment being definitively seated with a Seating Tip on a Threaded Straight Handle.
17.
Universal Abutment being definitively seated with a Seating Tip on a Threaded Straight Handle.
18.
Third Universal Abutment being transported to the right implant with a seating jig.
19.
Resin seating jig on three Universal Abutments.
20.
Universal Abutment being seated with a Seating Tip on a Threaded Straight Handle.
21.
Resin jig prior to being removed.
22.
Universal Abutment being definitively seated.
23.
Universal Abutments prior to receiving Retentive Copings.
24.
Vaseline-lined Retentive Coping being transported to Universal Abutment.
25.
Three Vaseline-lined Retentive copings seated on three Universal Abutments.
26.
TRINIA® prosthesis placed onto Retentive Copings.
27.
Passive fit of TRINIA® prosthesis being confirmed.
28.
Appropriate occlusal contact being confirmed.
29.
Slight metallic marking indicating the need for reducing the TRINIA® material.
30.
Bore of the TRINIA® prosthesis being relieved.
31.
Vaseline being applied to the prosthesis to facilitate removal of extraneous resin cement.
32.
Resin cement being applied to bore of prosthesis.
33.
Occlusal pressure being applied while the resin cement is being cured.
34.
TRINIA® prosthesis being removed from the Universal Abutments.
35.
View of extraneous cement around the three Retentive Copings cemented within the prosthesis.
36.
Occlusal contacts being marked.
37.
Blue markings indicating occlusal contacts.
38.
Facial view of lower TRINIA® prosthesis with maxillary teeth.
39.
Panoramic radiographic image of TRINIA® telescopic prosthesis with significant bilateral distal extensions.
Welcome to the Bicon Case Study Library. The latest Bicon clinical cases will be regularly posted here. There are currently 327 cases containing over 18584 clinical images.