Listing for Category: Immediate Placement

	Immediate Placement of a 5.0 x 6.0mm Bicon SHORT® Implant for a Mandibular Premolar using the One-Stage Technique Posted on August 1, 2018 in Immediate Placement, Integrated Abutment Crowns™, One Stage, Restorative, SHORT® Implants, Surgical This treatment demonstrates the extraction of a mandibular primary tooth and the immediate placement of a 5.0 x 6.0mm Bicon SHORT® Implant using the one-stage technique with a tranmucosal temporary abutment. Implant-level and abutment-level impression techniques are also shown, as well as the insertion of the Integrated Abutment Crown™ (IAC).
	Restoration of Three Immediately Placed and Loaded 4.5 x 8.0mm Bicon SHORT® Implants and a Single One-Stage Placement in the Anterior Maxilla with a Twelve-Year Follow-Up Posted on July 19, 2018 in Immediate Placement, Immediate Stabilization and Function, Integrated Abutment Crowns™, One Stage, Restorative, SHORT® Implants, Surgical This treatment demonstrates the one-stage placement of one 4.5 x 8.0mm Bicon SHORT® Implant with a collagen membrane and the immediate placement and loading of three 4.5 x 8.0mm Bicon SHORT® Implants. Also shown is their initial restoration with four Integrated Abutment Crowns™ (IACs), as well as their subsequent restoration of new IACs with wider hemispherical bases eleven years later and an evaluation twelve years after the initial implant placements.
	Immediate Load of Two 4.0 x 8.0mm and Two 4.5 x 8.0mm Bicon SHORT® Implants in the Anterior Maxilla Posted on July 3, 2018 in Immediate Placement, SHORT® Implants, Surgical This treatment demonstrates the removal of two canine root tips, and the immediate placement and loading of two 4.0 x 8.0mm and two 4.5 x 8.0mm Bicon SHORT® implants with four Universal Abutments in the anterior maxilla. Subsequently, the insertion of a six-unit resin-cemented TRINIA® prosthesis is shown, as well as enhanced papillae over a two-year period.
	Implant Placement and Restoration of a Six-Unit Cemented TRINIA® Prosthesis in Only Two Clinical Visits Posted on January 18, 2018 in Extraction, Immediate Placement, SHORT® Implants This treatment demonstrates the extraction of a maxillary lateral incisor and the immediate placement of a 4.0 x 6.0-mm implant with a 2.5-mm well for a 91-year-old man. An implant-level transfer impression was made for an existing integrated molar implant and the immediately placed incisor implant. The existing molar implant, with a 3.0-mm well, was used to provide support for a temporary prosthesis during the four months of healing. The permanent TRINIA® prosthesis with six units of handcrafted polyceramic teeth was cemented at the time of the implant’s uncovering during the patient’s second clinical visit.
	Immediate Load of Three Maxillary Incisor 4.5 x 8.0mm Implants Posted on December 13, 2017 in Immediate Placement, Integrated Abutment Crowns™, Restorative, Surgical This treatment demonstrates the extraction of teeth #8, 9, and 10, and the subsequent placement and immediate loading of three 4.5 x 8.0mm implants with 2.5mm wells, the preparation of the osteotomy with latch reamers rotating at 50RPM, as well as the fabrication of a temporary stabilizing prosthesis with polyacrylate material and a vacupress former.
	Immediate Loading of Three Maxillary Implants with a Winged TRINIA® Transitional Prosthesis Posted on May 27, 2017 in Immediate Placement, Surgical This treatment demonstrates the technique of immediately loading two 4.0 x 6.0mm implants and one 5.0 x 5.0mm implant by using a winged TRINIA® transitional prosthesis and one existing 4.5 x 8.0mm implant.
	Immediate Placement and Restoration of a Maxillary First Molar with an Extra-Orally Cemented E-Max Crown Posted on January 25, 2017 in Extraction, Immediate Placement, Restorative, Surgical This case demonstrates the extraction of a maxillary first molar and the immediate placement of a 6.0 x 6.0mm implant. Additionally, three different impression techniques are presented: implant-level transfer impression, abutment-level transfer impression, and digitally scanned impression flag. Furthermore, the extra-oral cementation of an E-max (lithium disilicate) crown is demonstrated.
	Placement and Restoration of a 3.0 x 6.0mm SHORT® Implant in a Seemingly Impossible Clinical Situation Posted on October 9, 2016 in Immediate Placement, Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical This case demonstrates three years of remarkable healing and clinical capabilities of a Bicon implant which was restored with an Integrated Abutment Crown™ (IAC) in a seventy-two-year-old male patient. Due to a variety of extenuating circumstances, a 3.0 x 6.0mm SHORT® Implant was immediately placed with a significant amount of SynthoGraft™, a pure phase beta tricalcium phosphate material, and a collagen membrane in a seemingly impossible clinical situation after the removal of a fractured and infected mandibular lateral incisor.
	Extraction and Immediate Placement of a 3.0 x 8.0mm Bicon NARROW™ Implant for a Mandibular Central Incisor and its Restoration with an Integrated Abutment Crown™ Posted on September 29, 2015 in Extraction, Immediate Placement, Integrated Abutment Crowns™, Restorative, Surgical, Uncovering This case demonstrates the insertion, restoration, and interdental papillae maturation of a 3.0 x 8.0mm Bicon NARROW™ Implant for a mandibular right central incisor over the course of a two-year period. This case also demonstrates the use of a hand reamer attached to a hand reamer extender.
	Placement and Immediate Load of Two Maxillary Central Incisor Implants Posted on September 6, 2015 in Extraction, Immediate Placement, Surgical This case demonstrates the immediate placement and loading of two maxillary central incisor implants using a TRINIA™ and Ceramage transitional prosthesis and two Bicon Universal Abutments to stabilize two immediately placed 4.5 x 8.0mm implants.