Listing for Category: Two Stage

	Placement and Immediate Loading with a Mandibular Full-Arch TRINIA® Prosthesis of Four Fixed-Detachable Universal Abutment Transitional Implants Posted on March 10, 2021 in Bridges, Fixed, Immediate Stabilization and Function, Restorative, SHORT® Implants, Surgical, Two Stage This case demonstrates the placement of two 4.0 x 6.0mm and two 4.0 x 8.0mm Standard Profile Fixed-Detachable Universal Abutment Transitional Implants using guided surgery and their immediate loading with a mandibular full-arch screw-retained TRINIA® prosthesis with cemented copings within the bores of the TRINIA® prosthesis, subsequent to the placement of four Bicon SHORT® Implants also using guided surgery for their 2.0mm pilot osteotomies.
	Two Full-Arch TRINIA® Telescopic Restorations Featuring Seven Implant Placements and the Use of Both Retentive and Custom Cast Copings for a Seventy-Year-Old Patient in Five Clinical Visits Posted on January 24, 2021 in Extraction, Fixed, Immediate Placement, Restorative, SHORT® Implants, Surgical, Telescopic Restorations, Two Stage, Uncovering This case demonstrates the extraction of six teeth and the placement of four maxillary implants (two using sinus lift abutments and others using bone grafting procedures with SynthoGraft™ and Bicon Resorbable Collagen Membranes) and three mandibular implants, uncovering of implants and two conventional implant-level transfer impressions, two occlusal bite registrations, insertion of the mandibular TRINIA® restoration with three cemented Retentive Copings on Universal Abutments and the insertion of the maxillary TRINIA® restoration with four custom cast Sci-tec copings on modified Universal Abutments for a seventy-year-old female patient. The entire treatment was achieved in only five clinical visits during a seven-month period without fabricating any new transitional prostheses.
	Immediate Loading Using Guided Surgery for Two Maxillary Incisor SHORT® Implants with Fixed-Detachable Universal Abutments and a Five-Unit TRINIA® Prosthesis Posted on October 5, 2020 in Extraction, Immediate Placement, Immediate Stabilization and Function, SHORT® Implants, Surgical, Two Stage This case demonstrates the extraction of three maxillary incisor teeth and, using guided surgery, the placement of two 4.5 x 8.0mm SHORT® Implants for immediate loading with a prefabricated five-unit TRINIA® prosthesis on three Fixed-Detachable Universal Abutments, one of which was inserted into a previously-integrated canine implant for a 70-year-old male patient.
	Two-Stage Placement of a 5.0 x 6.0mm Bicon SHORT® Implant for a Maxillary Left Second Premolar and its Restoration with an Integrated Abutment Crown™ (IAC) Posted on July 1, 2019 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage, Uncovering This treatment demonstrates the two-stage placement of a 5.0 x 6.0mm Bicon SHORT® Implant for a maxillary left second premolar, the making of its full arch implant-level transfer impression, and its restoration with an Integrated Abutment Crown™ (IAC).
	Two-Stage Placement of a 4.5 x 8.0mm Bicon SHORT® Implant for a Maxillary Right Central Incisor Five Months After Grafting a Large Buccal Defect with SynthoGraft™ Posted on February 25, 2019 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage This treatment demonstrates the two-stage placement of a 4.5 x 8.0mm Bicon SHORT® Implant for a maxillary right central incisor five months after grafting a large buccal defect and using SynthoGraft™, a Collagen Membrane, and a Collagen Plug. Also shown is the making of a full arch implant-level transfer impression and the subsequent restoration of the implant with an Integrated Abutment Crown™ (IAC).
	Two-Stage Placement of a 5.0 x 6.0mm Bicon SHORT® Implant with an Internal Sinus Lift Procedure using Guided Surgery for a Maxillary Right First Molar and its Restoration with an Integrated Abutment Crown™ (IAC) Posted on January 10, 2019 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage This treatment demonstrates the two-stage placement of a 5.0 x 6.0mm Bicon SHORT® Implant with an internal sinus lift procedure using guided surgery for a maxillary right first molar and its restoration with an Integrated Abutment Crown™ (IAC). Guided surgery designed for a 5.0 x 5.0mm Bicon SHORT® Implant was used to minimize the risk of sinus perforation and expedite the placement of the 5.0 x 6.0mm Bicon SHORT® Implant with an internal sinus lift procedure. The osteotomy was deepened using incrementally longer Guided Surgery Reamers through the orifice of a 5.0mm Guide Ring until the length of the intended implant was achieved. The top of the Guide Ring is designed to be 12.0mm above the top of the implant when the implant is placed 2.0 to 3.0mm below the alveolar crest of bone.
	Guided Surgery with Two-Stage Technique for the Restoration of a 5.0 x 8.0mm Bicon SHORT® Implant for a Mandibular Right First Molar with an Integrated Abutment Crown™ (IAC) Posted on December 7, 2018 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage, Uncovering Using the Bicon Guided Surgery Technique, a 5.0 x 8.0mm Bicon SHORT® Implant was placed with a two-stage surgery for a mandibular right first molar and restored with an Integrated Abutment Crown™ (IAC). This technique employs a Spade Drill to initially establish the osteotomy to the diameter of the intended implant. Subsequently, the osteotomy was deepened using incrementally longer Guided Surgery Reamers through the orifice of a 5.0mm Guide Ring until the length of the intended implant was achieved. The top of the Guide Ring was designed to be 15.0mm above the top of the implant when the implant is placed 2.0 to 3.0mm below the alveolar crest of bone.
	Restoration of a Maxillary Left Second Premolar with a 4.5 x 5.0mm Bicon SHORT® Implant Using the Two-Stage Technique with SynthoGraft™ and a Collagen Membrane Posted on November 26, 2018 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage, Uncovering This treatment demonstrates the restoration of a maxillary left second premolar with a 4.5 x 5.0mm Bicon SHORT® Implant using the two-stage technique with SynthoGraft™ and a Collagen Membrane, as well as the subsequent uncovering, full arch implant-level transfer impression, and insertion of an Integrated Abutment Crown™ (IAC).
	Restoration of a 4.5 x 8.0mm Bicon SHORT® Implant for a Maxillary Right Central Incisor Using the Two-Stage Technique with Bone Grafting Posted on October 31, 2018 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage This treatment demonstrates the restoration of a 4.5 x 8.0mm Bicon SHORT® Implant for a maxillary right central incisor using the two-stage technique with bone grafting of a labial fenestration using SynthoGraft™ and autogenous bone with a Collagen Membrane.
	Guided Surgery and Two-Stage Technique for the Restoration of a 5.0 x 5.0mm Bicon SHORT® Implant for a Mandibular Right Second Molar with an Integrated Abutment Crown™ (IAC) Posted on September 12, 2018 in Integrated Abutment Crowns™, Restorative, SHORT® Implants, Surgical, Two Stage This treatment demonstrates the restoration of a 5.0 x 5.0mm Bicon SHORT® Implant for a mandibular right second molar with an Integrated Abutment Crown™ (IAC) using guided surgery and a two-stage technique.