Titanium
Titanium Temporary Abutment Guide
Titanium Temporary Abutments with a 3.0mm Post
Titanium Temporary Abutments with a 2.5mm Post
Titanium Temporary Abutments with a 2.0mm Post
Titanium Temporary Abutment Considerations
- Temporary abutments should be placed with gentle tapping, especially the 2.5mm posts.
- Temporary abutments are made of surgical grade titanium alloy Ti6Al4V.
- The hemispherical portion of a temporary abutment matches the profile of the corresponding non-shouldered abutment with the same diameter.
- Temporary abutments are designed to form a gingival sulcus and to preserve papillae during the one-stage surgical procedure or after a two-stage uncovering procedure.
- Choose an abutment height that is sufficient to laterally support the interproximal papillae without its being too tall such that it would receive undesirable forces from the tongue.
- The abutment height is measured from the top of the implant to the top of the abutment when the abutment is fully seated.
- Temporary abutments may be modified with a #1557 carbide bur or other carbide burs.
PEEK (PolyEther Ether Ketone)
PEEK Temporary Abutment Guide
PEEK Temporary Abutments with a 3.0mm Post
PEEK Temporary Abutments with a 2.5mm Post
PEEK Temporary Abutments with a 2.0mm Post
