Case Studies

thumbnail

Two-Stage Placement of a 5.0 x 6.0mm Bicon SHORT® Implant with an Internal Sinus Lift using Guided Surgery for a Maxillary Right First Molar and its Restoration with an IAC

Posted on in Case Studies, Techniques

This case study video demonstrates the two-stage placement of a 5.0 x 6.0mm Bicon SHORT® Implant with an internal sinus lift procedure using guided surgery for a maxillary right first molar and its restoration with an Integrated Abutment Crown™ (IAC). The guided surgery placement was designed for a 5.0 x 5.0mm implant in order to minimize the risk of sinus perforation and expedite the placement of the 5.0 x 6.0mm Bicon SHORT® Implant with an internal sinus lift procedure. The osteotomy was then deepened using incrementally longer Guided Surgery Reamers through the 5.0mm Guide Ring until the length of the intended osteotomy and sinus elevation was achieved for the 6.0mm implant. In addition, one-week, nine-month, and five-year follow-up images are provided.

thumbnail

Two Stage Placement, Uncovering, and Restoration of a Mandibular Posterior 4.5 x 6.0mm Bicon SHORT® Implant

Posted on in Introductory, Case Studies, Techniques

This case study video provides a comprehensive overview of the fundamental Bicon surgical and restorative techniques for a missing mandibular first molar. It demonstrates the two-stage placement of a 4.5 x 6.0mm SHORT® Implant, subsequent uncovering, implant-level transfer impression, crown insertion, and final restoration with an Integrated Abutment Crown™ (IAC). In addition, five-month follow-up images are provided.

thumbnail

Fabricating and Inserting a Maxillary and a Mandibular Telescopic TRINIA® Prosthesis with Universal Abutment Copings on Bicon SHORT® Implants

Posted on in Case Studies, Techniques

This case study video demonstrates the clinical techniques for fabricating and inserting a maxillary and a mandibular telescopic TRINIA® prosthesis with Universal Abutment copings each supported by two 4.5 x 8.0mm and two 5.0 x 6.0mm Bicon SHORT® Implants for a sixty-eight-year-old male patient.

thumbnail

Extraction, Immediate Placement, and Restoration of a Mandibular Primary Molar with an Integrated Abutment Crown™ (IAC)

Posted on in Case Studies, Techniques

This comprehensive video case study demonstrates the extraction of a mandibular primary molar and the immediate placement of a 5.0 x 6.0mm Bicon SHORT® Implant, including the use of a sulcus former to countersink the orifice of the osteotomy which minimizes the inadvertent displacement of the osteotomy from dense or sloping bone. Additionally, the implant-level impression, temporization, and final seating of the Integrated Abutment Crown™ (IAC) are demonstrated, with 2.5-year follow-up images.

thumbnail

All the Things I Can Only Do with Bicon Implants

Posted on in Introductory, Case Studies

In this video, Dr. John Morgan shares his thoughts on why the Bicon Dental Implant is sometimes the only implant system he can use for certain cases and discusses five primary situations where Bicon truly shines for him. He is an oral surgeon in private practice and has been using the Bicon system for over twenty years. He also uses multiple different implant systems for his referral base but is frequently asked why he prefers Bicon. Dr. John Morgan is Board Certified with the American Board of Oral and Maxillofacial Surgery and a Fellow of the American Association of Oral and Maxillofacial Surgeons. He is also a Clinical Assistant Professor in the Department of Oral & Maxillofacial Surgery at the Boston University Henry M. Goldman School of Dental Medicine.

thumbnail

Immediate Placement and Restoration of a Maxillary First Molar with an Extra-Orally Cemented Lithium Disilicate Crown

Posted on in Case Studies, Techniques

This comprehensive video case study demonstrates the extraction of a maxillary first molar and the immediate placement of a 6.0 x 6.0mm Bicon SHORT® Implant. Additionally, three different impression techniques are presented: implant-level with impression material, implant-level with digital scanning, and abutment-level transfer impression. Furthermore, the extra-oral cementation of a lithium disilicate crown and its final seating are demonstrated.

thumbnail

Prefabricated Retentive Copings for Telescopic TRINIA® Restorations

Posted on in Case Studies, Techniques

This video demonstrates the fabrication of telescopic TRINIA® prostheses using cemented prefabricated retentive and non-retentive titanium copings on Bicon Universal Abutments, the fabrication of light-cured resin jigs used for the orientation and insertion of the abutments, and presents five clinical case studies highlighting the benefits of these innovative techniques.

thumbnail

Immediate Placement and Loading of Four Maxillary Incisor SHORT® Implants

Posted on in Case Studies

This case study video demonstrates the immediate placement and loading of four maxillary incisors with a TRINIA® stabilization prosthesis, and their restoration with TRINIA® polyceramic crowns for a 75-year-old man in four clinical visits.

thumbnail

Clinical Capabilities of the Bicon 3.0 x 6.0mm NARROW® Implant

Posted on in Case Studies

In this video, Dr. Laura Murcko discusses the clinical capabilities of the Bicon 3.0 x 6.0mm NARROW® Implant. She discusses recommendations for success and presents multiple clinical cases for review.

thumbnail

Full-Arch Telescopic TRINIA® Prostheses

Posted on in Case Studies

Join Dr. Laura Murcko for a comprehensive video case study demonstrating the clinical and laboratory procedures for the fabrication of maxillary and mandibular full-arch telescopic TRINIA® restorations in only three clinical visits.