Pose en deux temps d’un implant court Bicon 5,0 x 6,0 mm avec une élévation sinusale interne par chirurgie guidée pour une première molaire maxillaire droite et sa restauration avec une couronne à pilier intégré (IAC™)

Cette vidéo montre la pose en deux temps d’un implant court Bicon 5,0 x 6,0 mm avec une élévation sinusale interne par chirurgie guidée dans la zone d’une première molaire maxillaire droite et sa restauration avec une couronne à pilier intégré (IAC™). La mise en place par chirurgie guidée a été conçue pour un implant […]

Immediate Placement of a Maxillary Lateral Incisor

This case study and technique video demonstrates the case planning, extraction, osteotomy preparation, and immediate placement of a 4.0 x 8.0mm implant with a 2.5mm well for a maxillary lateral incisor. Additionally, the technique of changing the Pilot Drill trajectory while drilling on a slope is demonstrated. This technique facilitates ideal implant placement. For the […]

Двухэтапная установка имплантата 4,0 х 8,0 мм во фронтальный отдел верхней челюсти и его протезирование интегрированной коронкой (IAC).

В данном клиническом видео показаны: планирование имплантационного лечения, формирование ложа и установка имплантата 4,0 х 8,0 мм (шахта 2,5 мм) в область клыка верхней челюсти с применением костного графта Synthograft и коллагеновой мембраны, раскрытие имплантата через 4 месяца после установки, снятие оттиска с уровня имплантата и протезирование интегрированной коронкой (IAC). В дополнение проведена эстетическая коррекция […]

Bicon SHORT® Implants and TRINIA® on Three

In this video, Rolf Ewers, MD, DMD, Ph.D. discusses the revolutionary TRINIA® on Three technique and its long-term results. After experiencing over six years of reliable results with full-arch TRINIA® prostheses supported by four SHORT® Implants, he decided to modify the study design in 2016 to follow full-arch TRINIA® prostheses supported by only three 4.0 […]

Two-Stage Placement of a 4.0 x 8.0mm Maxillary Canine Implant and its Restoration with an Integrated Abutment Crown™ (IAC)

This case study and technique video demonstrates the case planning, osteotomy preparation, and placement of a 4.0 x 8.0mm implant with a 2.5mm well in a maxillary canine site using a collagen membrane and SynthoGraft™ bone grafting procedure. After four months of healing, its uncovering, implant-level impression, and restoration with an Integrated Abutment Crown™ (IAC) […]

Laboratory Techniques for Full-Arch TRINIA® Prostheses

The unique benefits of a full-arch TRINIA® prosthesis are evident, for both you and your patients. In order to achieve clinical success, certain techniques must be followed in the lab. This video provides an overview of those practical techniques.

Inserting a Maxillary TRINIA® Prosthesis

This case study video demonstrates the insertion of five Bicon Universal Abutments and a maxillary telescopic TRINIA® prosthesis with the resin cementation of five Retentive Copings within the passive bores of the prosthesis — all within a 30-minute office visit.

Bicon SHORT® Implants Giới Thiệu

Video này giới thiệu về hệ thống Bicon SHORT® Implants: lịch sử phát triển và khoa học nằm sau thiết kế của hệ thống, cũng như làm thế nào Bicon có thể đem lại các khả năng tối ưu cho cấy ghép implant, và giảm thiểu sự cần đến thủ thuật ghép xương.