Bicon Dental Implants
Saturday, July 5th 2008 7:55PM EDT

Implants

Implants with a 2.0mm Well

Diameter and Coating Length Well Part Number
3.5mm NanoTite™ Implant 8.0mm 2.0mm 260-235-008
3.5mm NanoTite™ Implant 11.0mm 2.0mm 260-235-011
       
3.5mm HA Coated Implant 8.0mm 2.0mm 260-335-008
3.5mm HA Coated Implant 11.0mm 2.0mm 260-335-011
 
3.5mm Integra-Ti™ Implant 8.0mm 2.0mm 260-135-008
3.5mm Integra-Ti™ Implant 11.0mm 2.0mm 260-135-011

 

Diameter and Coating Length Well Part Number
4.0mm NanoTite™ Implant 8.0mm 2.0mm 260-240-008
4.0mm NanoTite™ Implant 11.0mm 2.0mm 260-240-011
 
4.0mm HA Coated Implant 8.0mm 2.0mm 260-340-008
4.0mm HA Coated Implant 11.0mm 2.0mm 260-340-011
 
4.0mm Integra-Ti™ Implant 8.0mm 2.0mm 260-140-008
4.0mm Integra-Ti™ Implant 11.0mm 2.0mm 260-140-011

 

Since 1985, each Bicon implant has been grit blasted with alumina and passivated in a nitric acid solution. Bicon formerly referred to this controlled surface as “Uncoated”; however, this controlled surface will now be referred to as Integra-Ti™.

 

NanoTite™ is an ion-beam modification of Bicon’s standard Integra-Ti™ titanium alloy surface. Using an Ion-Beam Assisted Deposition process, the titanium alloy is modified with a thin (less than 1 micrometer) amorphous calcium phosphate compound with HA-like chemistry and physical properties for enhancement of bone integration.

 

Implants with a 3.0mm Well

Diameter and Coating Length Well Part Number
4.5mm NanoTite™ Implant 6.0mm 3.0mm 260-245-306
4.5mm NanoTite™ Implant 8.0mm 3.0mm 260-245-308
4.5mm NanoTite™ Implant 11.0mm 3.0mm 260-245-311
 
4.5mm HA Coated Implant 6.0mm 3.0mm 260-345-306
4.5mm HA Coated Implant 8.0mm 3.0mm 260-345-308
4.5mm HA Coated Implant 11.0mm 3.0mm 260-345-311
 
4.5mm Integra-Ti™ Implant 8.0mm 3.0mm 260-145-308
4.5mm Integra-Ti™ Implant 11.0mm 3.0mm 260-145-311

 

Diameter and Coating Length Well
Part Number
5.0mm NanoTite™ Implant 6.0mm 3.0mm
260-250-306
5.0mm NanoTite™ Implant 8.0mm 3.0mm
260-250-308
5.0mm NanoTite™ Implant 11.0mm 3.0mm
260-250-311
 
5.0mm HA Coated Implant 6.0mm 3.0mm
260-350-306
5.0mm HA Coated Implant 8.0mm 3.0mm
260-350-308
5.0mm HA Coated Implant 11.0mm 3.0mm
260-350-311
 
5.0mm Integra-Ti™ Implant 8.0mm 3.0mm
260-150-308
5.0mm Integra-Ti™ Implant 11.0mm 3.0mm
260-150-311

 

Diameter and Coating Length Well Part Number
6.0mm NanoTite™ Implant 5.7mm 3.0mm 260-260-357
6.0mm NanoTite™ Implant 8.0mm 3.0mm 260-260-108
 
6.0mm HA Coated Implant 5.7mm 3.0mm 260-360-357
6.0mm HA Coated Implant 8.0mm 3.0mm 260-360-108
 
6.0mm Integra-Ti™ Implant 5.7mm 3.0mm 260-160-357
6.0mm Integra-Ti™ Implant 8.0mm 3.0mm 260-160-108

 

Since 1985, each Bicon implant has been grit blasted with alumina and passivated in a nitric acid solution. Bicon formerly referred to this controlled surface as “Uncoated”; however, this controlled surface will now be referred to as Integra-Ti™.

 

NanoTite™ is an ion-beam modification of Bicon’s standard Integra-Ti™ titanium alloy surface. Using an Ion-Beam Assisted Deposition process, the titanium alloy is modified with a thin (less than 1 micrometer) amorphous calcium phosphate compound with HA-like chemistry and physical properties for enhancement of bone integration.

 

Implant Selection Considerations

• All implants are packaged with a healing plug.

• The choice of implant length and width depends upon available bone and expected occlusal loads.

• The Bicon implant is designed, for an aesthetic emergence profile, to be placed below the crest of the alveolar ridge to the extent that the implant is 5.0mm below the facial crest of the gingiva.

• The implant may be placed at or slightly above the alveolar crest, if an aesthetic emergence profile is not a concern.
• In general, choose the widest but not necessarily the longest implant the bone will allow.

• Place one implant per tooth, posteriorly to the canine, if practical.
• Use HA coated or NanoTite™ implants for poor bone quality or grafted bone cases.

• See reference for depth indicators on the 2.0mm pilot drill and the latch reamers.